DIY Perimeter Alarm To Protect Your Home&Camp

DIY Perimeter Alarm To Protect Your Home&Camp

DIY perimeter alarm to protect your home & camp

Nothing is more important to a homeowner than protecting their home. But, security systems can be expensive and it can be difficult to know what type of system to invest in. Fortunately, there’s an option for those who want to save money and still be able to keep their home safe: a DIY perimeter alarm.

A perimeter alarm is great for both homes and camps located in remote areas. It literally works by setting up a line of sensors that will monitor any movement within the line. Once movement is detected, the alarm will go off to alert you of the presence of intruders.

Now, let’s look at how you can set up your own DIY perimeter alarm in 6 simple steps:

1. Design the Layout of Your Perimeter Alarm

Before you begin the installation, map out where you want to place the sensors. Take into consideration your home’s layout and make sure you cover all the possible entry points. Place the sensors at least 6ft away from each other and around 8ft away from the home itself.

2. Choose Sensors for Your Alarm System

Now that you’ve mapped out the layout, you can start gathering the pieces you need for the system. The most common type of sensors for DIY perimeter alarms are infrared motion sensors, ultra-sonic, and shock detection sensors. Choose whichever is suitable for your needs and budget.

3. Locate the Control Box

Contact your local home security technician to determine where the best location for the control box should be. Once the control box is in place, it’s time to move on to the next step.

4. Connect and Install the Sensors

Before you start connecting and installing the sensors, double check to make sure you have the tools you need. Once everything is ready, start connecting each sensor to the control box and installing them at the designated area.

5. Test the System

The final step is to test your system. Make sure all the sensors are connected properly and the control box is working. If there are any issues, adjust them before you start using the alarm system.

6. Arm the System

Once you’ve completed the installation and testing of your system, it’s time to arm it. Make sure you use a PIN code that only you know and always remember to turn on the alarm before leaving your home or camp.

Setting up your own DIY perimeter alarm is a great way to keep your home or camp safe without the hefty price tag that comes with professional security systems. With a few simple steps, you can easily ensure a secure environment.

Leave a Reply

Your email address will not be published. Required fields are marked *